MAIN CHARACTERISTICS OF THE 601

Machine to score, break and separate laminated glass.

Structure made of electro-welded steel pipes, protected with two paint coats: anti-rust and coloured paint

The working tabletop is made of wood with flatness accuracy and covered with woollen felt, to assure the air cushion of maximum efficiency.

Table edges made of hard wood to allow the manual glass breaking.

Powerful system of forced air, produced with a fan to create the “air cushion” between the table and the glass surface.

This allows to reduce the friction consistently and make the glass movement operations easy.

The noise level of the air forced system is included into the established limits according to the standards.

CUTTING-BREAKING-SEPARATION MODULE :

A couple of bridges with an automatic clamping system to permit the glass cutting, breaking and PVB separation, to produce a right-angle glass edge without splinters, PATENTED BY BOTTERO.

Cutting head carriages moved by a transmission system formed by motorreductor, pulleys and toothed belts.

Cutting, breaking and PVB separation system PATENTED BY BOTTERO, equipped with a heating element at disappearance, pneumatically controlled.

Cutting length determined by a double photocell according to the glass sheet dimension.

Lubrication system with the flow concentrated on the score.

Possibility of processing low-e glass. Thanks to the traction roller covered with a special rubber material, it is possible to treat low-e without scratching the coated surface.

Possibility of excluding the lower cutting head to score monolithic glass up to 19mm thickness.

Possibility of performing the monolithic glass breakout up to 10-mm thickness.

Possibility of excluding the lubrication flow during the score.

Possibility of working on automatic or manual mode. In the last case every single function must be performed step by step: clamping, cutting, breaking of the glass, heating and PVB separation.

Easy and intuitive dialogue between the operator and the machine thanks to a software interface developed by taking in consideration all the end user necessities. During the cutting data inputs and on every operative machine function the operator is guided step by step by the software that helps and highlights possible errors.

ABUTMENT AND WORKING TABLE:

Pneumatic tilting arms used to load or unload glass sheets, case sizes or sub-plates.

Retractable lateral squaring lug of reference.

Sheet abutment bridge placed underneath the table, which permits to let the working tabletop free.

Retractable front abutment lugs of reference, pneumatically controlled.

Electronic bridge positioning with data inputs by the keyboard placed at the console on board the machine.

Machine control cabinet equipped with a PLC, electromechanical power circuits, drivers for the motors and electromechanical safety circuits.

		601 A	601 M
Machine Dimension		4890 x 7610 mm	1300 x 7610 mm
Weight		6500 Kg	3500 Kg
Working Height		910-950 mm	910-950 mm
Installed power		22 KVA	17 KVA
Cut speed		40 m/min	40 m/min
Tollerance		± 0,5 mm	± 0,5 mm
Straightness		0,5 mm	0,5 mm
Parallelism		1 mm	1 mm
Standard Glass Tickness		6+6+1.52 PVB	6+6+1.52 PVB
Max Cut		6100 mm	6100 mm
Min Cut		250	250
Max Squaring length		3210 mm
Min Squaring length		225 mm

Symbol Table

Standard

Optional

Not Available