“DISCOVERY 770DML ” model nc drilling machine.

“DISCOVERY 770DMW ” model nc drilling and milling machine

Technical description

“DISCOVERY 770DML” model

• The DISCOVERY 770DML opposing head drill machine is made up of a solid electrically welded steel base which represents the base on which the C-shaped structure runs, to which the upper and lower drilling heads are fixed.
• From a mechanical and electronic point of view, the machine comprises six axes controlled in terms of position and speed
• Alongside each drilling head there are a pair of tool stores, each with a capacity of 16 positions. These are revolving stores controlled electronically in terms of position which. Both stores are physically protected from the working area by mobile pneumatic safety guards
• SPINDLES: these are fastened to the end of the C-shaped structure. The tool cooling water runs inside the spindles
• The drilling cycle is managed entirely by the numeric control on the basis of the sequence compiled by the program.
• The drill machine operations are managed by a state of the art NUMERIC CONTROL which communicates constantly with a Personal Computer. The operator interface is created by a LDC display and a keyboard for introducing operating data.
• The machine’s personal computer is equipped with the operator interface software and it has been created by Bottero S.p.A. in Windows® environment. The control panel, which houses the LCD display, the keyboard, the various buttons and the warning lamps, has been positioned in an area ergonomically convenient for the operator, who can monitor the operation of the drill machine both on the screen and directly on the machine.
• The machine has an automatic lubrication system a central control unit managed by the personal computer. All the runners, linear way carriages and recirculating ball screws are lubricated at programmed intervals.

“DISCOVERY 770DMW” model

• The DISCOVERY 770DML opposing head drill machine is made up of a solid electrically welded steel base which represents the base on which the C-shaped structure runs, to which the upper and lower drilling heads are fixed.
• From a mechanical and electronic point of view, the machine comprises six axes controlled in terms of position and speed
• Alongside each drilling head there are a pair of tool stores, each with a capacity of 16 positions. These are revolving stores controlled electronically in terms of position which. Both stores are physically protected from the working area by mobile pneumatic safety guards
• SPINDLES: these are fastened to the end of the C-shaped structure and, in particular, the upper spindle, which carries out the milling operation, can rotate at up to 10,000 rpm, while the lower spindle has a limit of 6,000 rpm. The tool cooling water runs inside the spindles.
• The drilling / milling cycle is managed entirely by the numeric control on the basis of the set CAD CAM program.
• The drill machine operations are managed by a state of the art NUMERIC CONTROL which communicates constantly with a Personal Computer. The operator interface is created by a LDC display and a keyboard for introducing operating data.
• The machine’s personal computer is equipped with:
• Operator interface software, CAD-CAM software for preparing machining programs.
• Both programs have been created by Bottero S.p.A. in Windows® environment.
• The control panel, which houses the liquid crystal screen, the keyboard, the various buttons and the warning lamps, has been positioned in an area ergonomically convenient for the operator, who can monitor the operation of the drill machine both on the screen and directly on the machine.
• The machine has an automatic lubrication system a central control unit managed by the personal computer. All the runners, linear way carriages and recirculating ball screws are lubricated at programmed intervals.